How to Diskpart Erase/Clean a Drive Through the Command Prompt. To determine the disk number assigned to the 3. TB+ MBR partitioned drive follow the steps below.

How to Diskpart Erase/Clean a Drive Through the Command Prompt. To determine the disk number assigned to the 3. TB+ MBR partitioned drive follow the steps below.

You need to format a hard drive if you plan on using it in Windows. As complicated as that might sound, it's not really difficult to format a hard drive in any. Format the USB stick as NTFS. Make USB Volume Active Open up an (Administrator) command prompt window Run diskpart.exe and then set your drive and partition to point. I will walk you through the steps of using the Microsoft command prompt Diskpart utility to Clean, format, and assign a drive letter using command prompt.

Then select Disk Management). Choose Manage. Select Disk Management (listed under Storage). Look for the drive that is identified as the 3.

One easy way to write zeros to a hard drive is to format the drive in a special way using the format command from the Command Prompt.

TB drive (2. 79. 4GB). The properties window shows that the partition table on the drive is MBR . Important: note the Disk number (such as Disk 1). Open a Command Prompt window.

To open the Command Prompt on a Windows Vista or Windows 7 machine click on Start and type cmd in the search bar. Then right click on cmd. It will prompt you with the message, . A black Command Prompt window will open.

Our guide to wiping, formatting, and partitioning your hard drive using a Windows computer. If you’re anything like us, then you’ll have fistfuls of USB flash. Accessing the Command Prompt To boot up your system, just insert a USB Recovery Drive or an optical disc Recovery Drive and restart your system. Wiping a Secondary Hard Drive. Click "Start" and select "Computer" from the Start menu. A window opens listing your hard drives. Determine the letter designation.

On Windows 8 move your mouse to the bottom left hand corner of the desktop screen and right click. Select Command Prompt (Admin) from the pop- up menu.

This is the Command Prompt window. From the command prompt, type diskpart and press Enter. The diskpart prompt will open.

From the diskpart prompt, type list disk and press Enter. A list of disks will appear in a text format. You will return to the diskpart prompt.

Step one verified that Disk 1 is the 3. TB drive. Warning: Diskpart Erase/Clean will permanently erase/destroy all data on the selected drive. Please be certain that you are erasing the correct disk. From the diskpart prompt you will need to select a disk disk number (for instance, if the 3. TB+ drive is Disk 1, you would type select disk 1) and press Enter. Warning: Diskpart Erase/Clean will permanently erase/destroy all data on the selected drive.

Please be certain that you are erasing the correct disk. A message appears saying that the disk is selected. You will return to the diskpart prompt. Warning: Diskpart Erase/Clean will permanently erase/destroy all data on the selected drive. Please be certain that you are erasing the correct disk. From the diskpart prompt, type clean and press Enter. The drive's partition, data, and signature is now removed.

You will return to the diskpart prompt. Warning: Once you type clean and hit enter the drive will be erased. No warning will be provided. The Command Prompt window will display the message .